Repeater Modules

  Features

• Input: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
• Output: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
• Speed: 115.2k, 57.6k, 38.4k, 19.2k, 9600, 4800, 2400, 1200, 600, 300
• Auto baud rate and data format adjustment
• Isolation Voltage: 2500 VRMS

• Protocol: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
• Speed: 115.2k, 38.4k, 19.2k, 9600, 4800, 2400, 1200, 600, 300
• Auto baud rate and data format adjustment
• Isolation Voltage: 2500 VRMS
• Repeater request: Over 128 modules or distance over 4000 feet

• Protocol (DIP switch selectable): RS-232 (5-wire: RXD, TXD, RTS, CTS, GND); RS-422 (4-wire: TX+, TX-, RX+, RX-); RS-485 (2-wire: Data+, Data-)
• Speed: 300~115.2k bps
• Isolation Voltage: 2500 VRMS
• Fully USB compliant
• Repeater request: Over 128 modules or distance over 4000 feet

• Protocol (DIP switch selectable): RS-232 (5-wire: RXD, TXD, RTS, CTS, GND); RS-422 (4-wire: TX+, TX-, RX+, RX-); RS-485 (2-wire: Data+, Data-)
• Speed: 1200 ~ 115200 bps (RS-232 and RS-422/485 can set to different baud rate)
• Convert RS-422/485 to RS-232 with configurable address

• 48MHz, 186-Based Controller
• Auto sensing 10/100Base-T Ethernet
• High speed serial port (up to 230kbps) with hardware and modem flow controls
• 3 digital I/O pins (software selectable, shared with serial port signal)
• Compact size for easy integration
• TCP/IP, UDP, DHCP, SNMP, Telnet, ARP, ICMP, and TFTP Protocol Support
• E-Mail function (send only)
• Support for flow & modem control signals